Some buyers found that the plush toy had a drooping head, broken hands, broken feet, large and small faces, and long and short legs. This phenomenon occurs because the plush toy is under the action of external force, especially during the process of packaging and transportation of the plush toy, the folding position (force point) of the plush toy is squeezed to cause the displacement of the filler to form a fault. This will inevitably affect the overall shape of the plush toy. Plush toys below 1 meter are recommended to gently squeeze the surrounding or both sides of the filler (three-dimensional vacuum PP cotton) into the fault evenly, and then tapping a few times to restore the "baby" prototype. Example: head The drooping plush toy can push the cotton in the head and body to the neck evenly. The plush toy above 1 meter is more difficult to squeeze by hand because the filling (three-dimensional vacuum PP cotton) is thicker. It is recommended to use a long pick needle or a fine needle to pick up the filler (3D vacuum PP cotton), return the displaced filler (3D vacuum PP cotton) back to the original position, and then tap the toy to make the filler (3D vacuum) PP cotton) fluffy to maintain uniformity, you can restore its prototype. Special reminder: "Floating Dragon" is recommended to open the packaging bag and put the plush toy naturally for more than 5 hours, to be filled (3D vacuum PP cotton) rebound 80 Repair more than % (it is not recommended to repair immediately before the filler is rebounded, so as not to affect the repair effect).
Stuffed Animal Manufacturers, Plush Toy Manufacturers,China Custom stuffed animals product www.stuffedanimalmanufacturers.com
|